#Shareit uses which port how to
If you are not sure how to configure static IP on the device, you may do an address reservation refers to ‘ How to configure Address Reservation of Archer MR200’, so that IP will always be assigned to the device.Ģ. How to set up DDNS (NO-IP) of Archer MR200 How to set up DDNS (DynDNS) of Archer MR200 Then you can use domain name to visit the website. For the WAN IP is assigned dynamically by ISP, it is recommended to apply and register a domain name for the WAN refer to Set Up a Dynamic DNS Service Account. Users in the Internet can enter WAN IP (in this example: 218.18.232.154) to visit your personal website.ġ. Please note that the External Port should not be overlapped. You can add multiple virtual server rules if you want to provide several services in a router. You should verify the port number that the service need.ģ. If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually. It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use.Ģ. Enter the PC’s IP address 192.168.0.100 in the Internal IP field. The external port, internal port and protocol will be automatically filled with contents. Go to Advanced > NAT Forwarding > Virtual Servers, click Add.Ĭlick View Existing Services, and select HTTP. Please refer to How to log into the web-based management interface of Archer MR200?
#Shareit uses which port Pc
The PC is connected to the router with the WAN IP address 218.18.232.154.Īssign a static IP address to your PC, for example 192.168.0.100
I hope that my friends in the Internet can visit my website in some way. Share my personal website I’ve built in local network with my friends through the Internet.įor example, the personal website has been built in my home PC (192.168.0.100). Please verify the service port number before the configuration. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Different service uses different service port. Virtual server can be used for setting up public services in your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet.
At the same time virtual server can keep the local network safe as other services are still invisible from the Internet. Virtual servers: When you build up a server in the local network and want to share it on the Internet, Virtual Server can realize the service and provide it to the Internet users.
0 kommentar(er)
